DOOR COURTESY LIGHT (for Rear Door) INSPECTION

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.


  1. INSPECT COURTESY LIGHT ASSEMBLY

    A01GKWXE01
    Text in Illustration
    *a

    Component without harness connected

    (Courtesy Light Assembly)

    Tech Tips

    Use the same procedure for both courtesy lights.


    1. Apply battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition

      Battery positive (+) → Terminal 1

      Battery negative (-) → Terminal 2

      		 Illuminates

      If the result is not as specified, replace the courtesy light assembly.