HEADLIGHT ASSEMBLY (for LED Headlight) INSTALLATION

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.


  1. INSTALL HEADLIGHT ASSEMBLY LH


    1. Put protective tape around the headlight assembly LH.

    2. Attach the clip to install the headlight assembly LH.

    3. Install the 3 bolts.

      Torque:
      8.1 N*m  { 83 kgf*cm, 72 in.*lbf }

    4. Connect the connector.

      A01GL7YE01
      Text in Illustration
      *1 Protective Tape *2 -

  2. INSTALL FRONT BUMPER COVER

    Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. INSTALL COWL TOP VENTILATOR LOUVER RH


    1. A01GM4S

      Install the 6 clips and cowl top ventilator louver RH.

      Note

      Be sure to install the cowl top ventilator louver RH properly. If it is not installed properly, water may enter the engine room and cause malfunctions.

  5. ADJUST HEADLIGHT AIMING

    Click here

  6. ADJUST FOG LIGHT AIMING


    1. for Sport Package:

      Click here

    2. except Sport Package:

      Click here