LICENSE PLATE LIGHT ASSEMBLY REMOVAL


  1. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP


    1. A01GMO6E03
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the 3 claws.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A01GLUL

      Remove the 2 screws and luggage compartment door assist grip.

  2. REMOVE SWITCH BEZEL


    1. A01GJRX

      Using a screwdriver, detach the 2 claws and remove the switch bezel.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE NO. 2 COURTESY LIGHT ASSEMBLY

    A01GKCZE01
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver, detach the 2 claws.

      Tech Tips

      Tape the screwdriver tip before use.

    2. Disconnect the connector and remove the No. 2 courtesy light assembly.

  4. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER LH


    1. A01GM53

      Using a clip remover, remove the 3 clips and luggage compartment door hinge cover LH.

  5. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  6. REMOVE REAR COMBINATION LIGHT SERVICE COVER LH


    1. A01GLPC

      Detach the 2 claws and remove the rear combination light service cover LH.

  7. REMOVE REAR COMBINATION LIGHT SERVICE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  8. REMOVE BACK DOOR TRIM COVER


    1. A01GJGA

      Using a clip remover, remove the 4 clips.

    2. Detach the 10 clips and back door trim cover.

  9. REMOVE REAR LIGHT ASSEMBLY LH


    1. w/o Rear Fog Light:


      1. Put protective tape around the rear light assembly LH.

      2. Disconnect the connector.

      3. Remove the 2 nuts and 2 cap nuts and remove the rear light assembly LH.

        A01GNYAE01
        Text in Illustration
        *1 Protective Tape *2 Nut
        *3 Cap Nut - -

    2. w/ Rear Fog Light:


      1. Put protective tape around the rear light assembly LH.

      2. Disconnect the connector.

      3. Remove the 2 nuts and 2 cap nuts and remove the rear light assembly LH.

        A01GLJ1E01
        Text in Illustration
        *1 Protective Tape *2 Nut
        *3 Cap Nut - -

  10. REMOVE REAR LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  11. REMOVE NO. 3 LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH

    A01GKFX

    1. Detach the 4 claws and remove the No. 3 luggage compartment door outside garnish.

  12. REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH

    A01GM0IE01
    Text in Illustration
    *1 Protective Tape

    1. Remove the 6 screws.

    2. Put protective tape around the luggage compartment door outside garnish.

    3. Detach the 4 clips and remove the luggage compartment door outside garnish.

  13. REMOVE LICENSE PLATE LIGHT ASSEMBLY

    A01GJSBE01
    Text in Illustration
    *1 Protective Tape

    Tech Tips

    Use the same procedure for both license plate lights.


    1. Using a screwdriver, detach the 2 claws.

      Tech Tips

      Tape the screwdriver tip before use.

    2. Disconnect the connector and remove the license plate light assembly.