LIGHTING SYSTEM Rear Vanity Light does not Illuminate

WIRING DIAGRAM

A01GLITE01

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK HARNESS AND CONNECTOR (MAP LIGHT - BATTER AND BODY GROUND)

    A01GLOSE02

    1. Disconnect the X4 and X6 light connectors.

    2. Measure the resistance according to the value(s) in the table below.

      Standard resistance
      Tester Connection Condition Specified Condition
      X6-20 (GND4) - Body ground Always Below 1 Ω
      X4-16 (GND9) - Body ground Always Below 1 Ω

    3. Measure the voltage according to the value(s) in the table below.

      Standard voltage
      Tester Connection Condition Specified Condition
      X4-27 (DOME) - Body ground Always 11 to 14 V

    NG

    REPAIR OR REPLACE HARNESS OR CONNECTOR

    OK

  2. CHECK HARNESS AND CONNECTOR (MAP LIGHT - REAR VANITY LIGHT)

    A01GL7ME02

    1. Disconnect the X4, X6, X11 (for LH) and X14 (for RH) light connectors.

    2. Measure the resistance according to the value(s) in the table below.

      Standard resistance
      for LH
      Tester Connection Condition Specified Condition
      X4-26 (+B2) - X11-1 (B) Always Below 1 Ω
      X4-12 (RLVS) - X11-3 (E) Always Below 1 Ω
      X6-16 (RLVT) - X11-2 (RLVS) Always Below 1 Ω
      X4-26 (+B2) - Body ground Always 10 kΩ or higher
      X4-12 (RLVS) - Body ground Always 10 kΩ or higher
      X6-16 (RLVT) - Body ground Always 10 kΩ or higher
      for RH
      Tester Connection Condition Specified Condition
      X4-10 (+B1) - X14-1 (B) Always Below 1 Ω
      X4-13 (RRVS) - X14-3 (E) Always Below 1 Ω
      X6-14 (RRVT) - X14-2 (RRVS) Always Below 1 Ω
      X4-10 (+B) - Body ground Always 10 kΩ or higher
      X4-13 (RRVS) - Body ground Always 10 kΩ or higher
      X6-14 (RRVT) - Body ground Always 10 kΩ or higher

    NG

    REPAIR OR REPLACE HARNESS OR CONNECTOR

    OK

  3. CHECK REAR VANITY LIGHT ASSEMBLY (OPERATION)


    1. Check that the malfunction disappears when the rear vanity light is replaced with a normal one Click here.

      OK
      Malfunction disappears

    NG

    REPLACE MAP LIGHT ASSEMBLY Click here

    OK

    REPLACE REAR VANITY LIGHT ASSEMBLY Click here