HEADLIGHT ASSEMBLY (for HID Headlight) REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE COWL TOP VENTILATOR LOUVER RH


    1. A01GM4S

      Remove the 6 clips and cowl top ventilator louver RH.

  2. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE FRONT BUMPER COVER

    Click here

  5. REMOVE HEADLIGHT ASSEMBLY LH


    1. Put protective tape around the headlight assembly LH.

    2. Disconnect the connector.

    3. Remove the 3 bolts.

    4. Detach the clip to remove the headlight assembly LH.

      A01GNSHE01
      Text in Illustration
      *1 Protective Tape - -