LIGHTING SYSTEM, Diagnostic DTC:B241E, B241F

DTC Code DTC Name
B241E Headlamp Shade Motor LH Circuit
B241F Headlamp Shade Motor RH Circuit

DESCRIPTION

The headlight shade ECU operates the shade motor inside the headlight based on information from the AFS ECU.

DTC Code DTC Detection Condition Trouble Area
B241E Malfunction in headlight shade motor LH

  • Headlight assembly LH

  • Headlight shade ECU

  • AFS ECU
B241F Malfunction in headlight shade motor RH

  • Headlight assembly RH

  • Headlight shade ECU

  • AFS ECU

WIRING DIAGRAM

A01GHTME02

INSPECTION PROCEDURE

PROCEDURE


  1. CLEAR DTC


    1. Clear the DTC Click here.


    NEXT

  2. PERFORM ACTIVE TEST USING GTS (VARIABLE SHADE BEAM)


    1. Using the GTS, perform the Active Test Click here.

      AHS
      Tester Display Test Part Control Range
      Variable Shade Beam LH Variable shade beam LH operation OFF - ON
      Variable Shade Beam RH Variable shade beam RH operation OFF - ON

    NEXT

  3. CHECK FOR DTC


    1. Check for DTC Click here.

      OK
      DTC B241E or B241F output does not occur

    NG

    CHECK HEADLIGHT SHADE ECU Click here

    OK

    USE SIMULATION METHOD TO CHECK Click here

  4. CHECK HEADLIGHT SHADE ECU


    1. Temporarily replace the headlight shade ECU with a new or normally functioning one Click here.


    NEXT

  5. PERFORM ACTIVE TEST USING GTS (VARIABLE SHADE BEAM)


    1. Using the GTS, perform the Active Test Click here.

      AHS
      Tester Display Test Part Control Range
      Variable Shade Beam LH Variable shade beam LH operation OFF - ON
      Variable Shade Beam RH Variable shade beam RH operation OFF - ON

    NEXT

  6. CHECK FOR DTC


    1. Check for DTC Click here.

      OK
      DTC B241E or B241F output does not occur

    NG

    CHECK HEADLIGHT ASSEMBLY Click here

    OK

    END (HEADLIGHT SHADE ECU WAS DEFECTIVE)

  7. CHECK HEADLIGHT ASSEMBLY


    1. Temporarily replace the headlight with a new or normally functioning one Click here.


    NEXT

  8. PERFORM ACTIVE TEST USING GTS (VARIABLE SHADE BEAM)


    1. Using the GTS, perform the Active Test Click here.

      AHS
      Tester Display Test Part Control Range
      Variable Shade Beam LH Variable shade beam LH operation OFF - ON
      Variable Shade Beam RH Variable shade beam RH operation OFF - ON

    NEXT

  9. CHECK FOR DTC


    1. Check for DTC Click here.

      OK
      DTC B241E or B241F output does not occur

    NG

    REPLACE AFS ECU Click here

    OK

    END (HEADLIGHT WAS DEFECTIVE)