SEAT BELT CONTROL ECU REMOVAL


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. REMOVE COWL TOP VENTILATOR LOUVER RH


    1. A01GM4S

      for LHD:

      Remove the 6 clips and cowl top ventilator louver RH.

    2. A01GI9P

      for RHD:

      Remove the 6 clips and cowl top ventilator louver LH.

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    A01GIID

  5. REMOVE DECK BOARD ASSEMBLY (w/o Spare Tire)

    A01GMBU

  6. REMOVE ROPE HOOK ASSEMBLY


    1. A01GMHF

      Remove the 4 bolts and 4 rope hook assemblies.

  7. REMOVE ROPE HOOK


    1. A01GJF0

      Remove the 4 rope hooks by pushing the claws in the direction of the arrows in the illustration.

  8. REMOVE DECK TRIM SIDE BOARD LH


    1. A01GJT4E02
      Text in Illustration
      *A w/ Spare Tire
      *B w/o Spare Tire

      w/ Spear Tire:


      1. Remove the clip.

      2. Remove the deck trim side board LH.

    2. w/o Spear Tire:


      1. Detach the clip and deck trim side board LH.

  9. REMOVE DECK TRIM SIDE BOARD RH


    1. A01GL8HE02
      Text in Illustration
      *A w/ Spare Tire
      *B w/o Spare Tire

      w/ Spear Tire:


      1. Remove the clip.

      2. Remove the deck trim side board RH.

    2. w/o Spear Tire:


      1. Detach the clip and deck trim side board RH.

  10. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY


    1. A01GN4SE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the 2 claws and remove the No. 1 luggage compartment light assembly.

      Tech Tips

      Tape the screwdriver tip before use.

  11. REMOVE NO. 2 LUGGAGE COMPARTMENT TRIM HOOK (w/o Rear Cooler)


    1. Detach the No. 2 luggage compartment trim hook.

  12. REMOVE NO. 1 COOLER COVER (w/ Rear Cooler)


    1. A01GI3S

      Detach the 2 clips and remove the No. 1 cooler cover.

  13. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER


    1. w/o Rear Cooler:


      1. A01GJSC

        Remove the 4 claws, 3 clips and front luggage compartment trim cover.

    2. w/ Rear Cooler:


      1. A01GI60

        Remove the 4 claws, 5 clips and front luggage compartment trim cover.

  14. REMOVE DECK BOARD ASSEMBLY (w/o Spare Tire)

  15. REMOVE TOOL BOX (w/o Spare Tire)

    A01GI61

    1. Remove the 2 clips and tool box.

  16. REMOVE REAR FLOOR FINISH PLATE


    1. A01GHU1

      Remove the 3 clips.

    2. Detach the 4 clips and remove the rear floor finish plate.

  17. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH


    1. A01GJ4PE02
      Text in Illustration
      *A w/o Rear Cooler
      *B w/ Rear Cooler

      Remove the 2 clips.

    2. Detach the claw and luggage compartment trim cover assembly LH.

  18. REMOVE SEAT BELT CONTROL ECU

    A01GLUF

    1. Disconnect the 2 connectors.

    2. Remove the 2 nuts and seat belt control ECU.