PRE-CRASH SAFETY SYSTEM DTC CHECK / CLEAR

A01GJITE02

  1. CHECK DTC


    1. Turn the engine switch off.

    2. Connect the intelligent tester to the DLC3.

    3. Turn the engine switch on (IG).

    4. Using the intelligent tester, enter the following menus: Body / Pre-Crash1 / Diagnostic Code.

    5. Check for DTCs.

    6. Using the intelligent tester, enter the following menus: Body / Pre-Crash2 / Diagnostic Code.

    7. Check for DTC.

      Tech Tips

      As the driving support ECU and seat belt control ECU output DTCs for the pre-crash safety system, be sure to check the DTCs Pre-Crash1 and Pre-Crash2.

  2. CLEAR DTC


    1. Turn the engine switch off.

    2. Connect the intelligent tester to the DLC3.

    3. Turn the engine switch on (IG).

    4. Using the intelligent tester, enter the following menus: Body / Pre-Crash1 / Diagnostic Code.

    5. Select "Clear", and clear the data.

    6. Using the intelligent tester, enter the following menus: Body / Pre-Crash2 / Diagnostic Code.

    7. Select "Clear", and clear the data.

      Tech Tips

      As the driving support ECU and seat belt control ECU output DTCs for the pre-crash safety system, be sure to check the DTCs Pre-Crash1 and Pre-Crash2.