DUCT TEMPERATURE SENSOR REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  2. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT

    A01GM2F

    1. Remove the screw.

    2. Detach the claw and remove the No. 2 side defroster nozzle duct.

  3. REMOVE DEFROSTER NOZZLE ASSEMBLY

    A01GKTA

    1. Remove the 3 screws and defroster nozzle assembly.

  4. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT

    A01GJ63

    1. Remove the screw.

    2. Detach the claw and remove the No. 1 side defroster nozzle duct.

  5. REMOVE NO. 1 HEATER TO REGISTER DUCT

    A01GJ24

    1. Remove the 3 screws and No. 1 heater to register duct.

  6. REMOVE NO. 3 HEATER TO REGISTER DUCT

    A01GNK8

    1. Remove the 3 screws and No. 3 heater to register duct.

  7. REMOVE COOLER (DUCT SENSOR) THERMISTOR


    1. A01GIUG

      Detach the 4 claws and remove the 2 cooler (duct sensor) thermistors.