CONDENSER (for AWD) INSTALLATION


  1. INSTALL COOLER DRYER


    1. Using pliers, install the cooler dryer.

    2. Apply a sufficient amount of compressor oil to the contact surfaces of a new O-ring and the cap.

      Compressor oil
      ND-OIL 8 or equivalent

    3. Install the O-ring to the cap.

    4. Using a 14 mm socket hexagon wrench, install the cap to the modulator.

      Torque:
      2.9 N*m  { 30 kgf*cm, 26 in.*lbf }

  2. INSTALL COOLER CONDENSER ASSEMBLY


    1. Install the cooler condenser assembly with the 4 bolts to the radiator assembly.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

  3. INSTALL RADIATOR ASSEMBLY WITH COOLER CONDENSER ASSEMBLY

    Click here