COMPRESSOR (for AWD) REMOVAL


  1. REMOVE ENGINE AND TRANSMISSION

    Click here

  2. REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR


    1. A01GJU8

      Remove the 3 bolts and heat insulator.

  3. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY LH


    1. A01GKQT

      Disconnect the air fuel ratio sensor connector.

    2. A01GMPG

      Remove the 8 nuts and exhaust manifold LH.

    3. Remove the gasket.

  4. REMOVE WITH PULLEY COMPRESSOR ASSEMBLY


    1. Disconnect the connector.

    2. A01GISS

      Remove the 2 bolts and 2 nuts.

    3. Using an E8 "TORX" socket wrench, remove the 2 stud bolts and with pulley compressor assembly.