BLOWER UNIT REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE AIR CONDITIONING UNIT

    Click here

  2. REMOVE BLOWER ASSEMBLY


    1. A01GNDB

      Remove the screw.

    2. Disconnect the connector.

    3. Detach the claw and remove the blower assembly.

  3. REMOVE NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY


    1. A01GK7T

      Remove the 3 screws and No. 1 blower damper servo sub-assembly.

  4. REMOVE BLOWER WITH FAN MOTOR SUB-ASSEMBLY


    1. A01GKY7

      Remove the 3 screws and blower with fan motor sub-assembly.

  5. REMOVE CLEAN AIR FILTER


    1. A01GNUV

      Detach the 2 claws and remove the clean air filter.