AIR CONDITIONING SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE AIR CONDITIONING SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the intelligent tester


      1. Connect the intelligent tester.

      2. Turn the engine switch on (IG).

      3. Turn the intelligent tester on.

      4. Enter the following menus: Body / Air Conditioner / Utility / Customize /.

      5. Select the setting by referring to the table below.

        Air Conditioner
        Display Default Contents Setting
        Set Temperature Shift Normal To control with the shifted temperature against the display temperature +2 C, +1 C, Normal, -1 C, -2 C
        Evaporator Control Automatic Function to set the evaporator control to the AUTOMATIC position (Automatic) to save power, or to the coldest position (Manual) to dehumidify the air and to prevent the windows from fogging up Manual or Automatic
        Compressor Mode Automatic Function to turn the A/C switch ON automatically by pressing the AUTO button when the blower is ON and the A/C switch is OFF Manual or Automatic
        Air Inlet Mode* Automatic In case of turning the A/C switch ON when you desire to make the compartment cool down quickly, this is the function to change the mode automatically to RECIRCULATION mode Manual or Automatic
        Foot/DEF Auto Mode ON Function to turn the airflow from FOOT / DEF ON automatically when AUTO MODE is ON ON or OFF
        Foot/DEF Automatic Blow Up Function ON Function to change the blower level automatically when the defroster is ON ON or OFF
        Ambient Temperature Shift Normal Function to control the shifted ambient temperature in relation to the displayed ambient temperature +3 C, +2 C, +1 C, Normal, -1 C, -2 C, -3 C
        Rear A/P HI Set ON Function to permit the Rear A/P HI Set when AUTO MODE is ON ON or OFF
        Filter Sensor Normal Function to change the sensitivity of the air conditioning filter clogging sensor Less, Normal, More
        Emission Gas Sensor Shift Normal Function to change the sensitivity of the exhaust gas sensor Much More, More, Little More, Normal, Little Less, Less, Much Less
        Add Foot Air in FACE Mode ON When the FACE mode is selected, an additional amount of air blow to the foot area. Selecting OFF will cancel this additional air flow ON or OFF
        ECO MODE Cancel ON Function to cancel the ECO mode drive when item is ON ON or OFF

        • *: except Mid-East

    2. Customizing using the Accessory meter


      1. Turn the engine switch on (IG).

      2. Enter the following menus: Setup / Vehicle / Vehicle Customization / Climate Settings /.

      3. Select the setting by referring to the table below:

        Climate Settings
        Display Default Content Setting
        Smog Sensor Sensitivity 0 Changes the sensitivity of the exhaust gas sensor. -3, -2, -1, 0, +1, +2, +3
        Auto A/C Mode On Enables or disables the function which automatically turns the air conditioning on according to the state of the AUTO switch. On or Off
        Efficient Ventilation Mode* On Enables or disables the function which automatically switches between recirculation and fresh air modes when the AUTO switch is on. On or Off

        • *: except Mid-East