POWER STEERING ECU REMOVAL


  1. REMOVE ENGINE ROOM SIDE COVER


    1. A01GL9VE01
      Text in Illustration
      *A for LHD
      *B for RHD

      Remove the 5 clips and engine room side cover RH.

  2. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY


    1. A01GLYAE01

      Remove the 5 clips labeled A.

    2. Lift up the air cleaner inlet cover sub-assembly to detach the 4 clips labeled B, and remove the air cleaner inlet cover sub-assembly.

  3. REMOVE COWL TOP VENTILATOR LOUVER


    1. A01GM4S

      for LHD:

      Remove the 6 clips and cowl top ventilator louver RH.

    2. A01GI9P

      for RHD:

      Remove the 6 clips and cowl top ventilator louver LH.

  4. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Click here.

  5. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  6. REMOVE POWER STEERING ECU

    A01GK43E01

    1. Release the locks of the 2 power steering ECU connectors A and B and disconnect the connectors.

    2. Disconnect the connector C from the power steering ECU.

    3. A01GIR5

      Remove the 4 bolts and detach the claw, and remove the power steering ECU.