POWER STEERING SYSTEM, Diagnostic DTC:C1563

DTC Code DTC Name
C1563 DC / DC Converter IG Power Supply Voltage

DESCRIPTION

The power steering ECU detects malfunctions in the power steering converter's IG power supply voltage based on the power steering converter's WDD communication signal (DC / DC condition notification signal). As a fail-safe function, when the IG power supply and power steering converter are malfunctioning, power assistance stops.

DTC No. DTC Detection Condition Trouble Area
C1563 This DTC is detected when power source voltage drops or remains high.

  • Wire harness

  • Power steering converter assembly

WIRING DIAGRAM

A01GN9TE03

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK POWER STEERING CONVERTER ASSEMBLY (IG TERMINAL)


    1. A01GJQAE32

      Disconnect the A46 converter connector.

    2. Measure the voltage according to the value(s) in the table below.

      Standard voltage
      Tester Connection Switch Condition Specified Condition
      A46-1 (IG) - Body ground Engine switch on (IG) 11 to 14 V

    NG

    REPAIR OR REPLACE HARNESS OR CONNECTOR

    OK

    REPLACE POWER STEERING CONVERTER ASSEMBLY Click here