STEERING COLUMN ASSEMBLY (w/o VGRS) REASSEMBLY


  1. INSTALL RETURN SPRING BRACKET


    1. Install the return spring bracket with 2 screws.

  2. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU


    1. Install the ECU with the 2 screws.

    2. Connect the connector to the ECU.

      Note

      The connectors on both ends of the wire harness between the telescopic motor and ECU are the same shape. When installing them, connect the connectors of the same color.

  3. INSTALL STEERING LOCK ACTUATOR ASSEMBLY


    1. A01GNFK

      Temporarily install the steering lock actuator assembly with 2 new tapered-head bolts.

    2. Tighten the 2 tapered-head bolts until the bolt heads break off.