VARIABLE GEAR RATIO STEERING SYSTEM Steering Wheel Vibrates or Abnormal Noise is Heard from Steering Wheel

INSPECTION PROCEDURE

Tech Tips

Check that no DTC is output for the VGRS system and electronically controlled brake system.

PROCEDURE


  1. CHECK STEERING WHEEL CONDITION


    1. Turn the engine switch on (IG).

    2. Check for abnormal noise or vibration while turning the steering wheel.

      OK
      No abnormal noise or vibration.
      Result
      Result Proceed to
      OK A
      NG (for 2WD) B
      NG (for AWD) C

      Note

      DTC C15A5/65 is stored when the engine switch is turned on (IG) with the connector disconnected from the steering control ECU. Clear the DTC after this check.


    B

    REPLACE STEERING ACTUATOR Click here

    C

    REPLACE STEERING ACTUATOR Click here

    A

  2. REPAIR OR REPLACE POWER STEERING SYSTEM


    1. Repair or replace the power steering system Click here.


    NEXT

    CHECK DTC (VGRS SYSTEM) Click here