DESCRIPTION
If the steering control ECU detects a malfunction in the lock mechanism, it will turn the master warning light on, store the DTC C15A5/65, and stop VGRS operation.
| DTC Code | Detection Condition | Trouble Area |
|---|---|---|
| C15A5/65 | The steering control ECU detects that the LG terminal voltage is abnormal |
|
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
CHECK HARNESS AND CONNECTOR (STEERING CONTROL ECU - STEERING ACTUATOR)
Disconnect the A41 steering control ECU connector.
Disconnect the x2 steering actuator connector.
Measure the resistance according to the value(s) in the table below.
| Standard resistance | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Turn the engine switch on (IG).
Measure the voltage according to the value(s) in the table below.
| Standard voltage | |||||||||
|---|---|---|---|---|---|---|---|---|---|
|
| NG |
|
REPAIR OR REPLACE HARNESS OR CONNECTOR |
| OK |
|
CHECK HARNESS AND CONNECTOR (STEERING CONTROL ECU - STEERING ACTUATOR)
Measure the resistance according to the value(s) in the table below.
| Standard resistance | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| Result | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| B |
|
REPLACE STEERING ACTUATOR Click here |
| C |
|
REPLACE STEERING ACTUATOR Click here |
| A |
|
REPLACE STEERING CONTROL ECU Click here