VARIABLE GEAR RATIO STEERING SYSTEM, Diagnostic DTC:C1592/52

DTC Code DTC Name
C1592/52 Actuator Neutral Position Calibration Incomplete

DESCRIPTION

The steering control ECU first checks the actuator angle neutral position calibration flag after entering test mode. If the ECU detects that steering actuator angle neutral position calibration is incomplete twice, it will store DTC C1592/52.

DTC Code Detection Condition Trouble Area
C1592/52 The steering control ECU detects that steering actuator angle neutral position calibration is incomplete twice

  • Steering actuator

  • Steering control ECU

INSPECTION PROCEDURE

PROCEDURE


  1. CLEAR DTC


    1. Clear the DTCs Click here.


    NEXT

  2. PERFORM VGRS SYSTEM CALIBRATION


    1. Perform VGRS system calibration Click here.


    NEXT

  3. CHECK DTC


    1. Check for DTCs Click here.

      Result
      Result Proceed to
      DTC is not output A
      C15B2/72 is output B
      C1592/52 is output after VGRS system calibration has been performed less than 3 times C
      1592/52 is output after VGRS system calibration has been performed 3 times or more (for 2WD) D
      1592/52 is output after VGRS system calibration has been performed 3 times or more (for AWD) E

    B

    REPLACE STEERING CONTROL ECU Click here

    C

    CLEAR DTC Click here

    D

    REPLACE STEERING ACTUATOR Click here

    E

    REPLACE STEERING ACTUATOR Click here

    A

    END