ELECTRIC PARKING BRAKE ECU INSTALLATION


  1. INSTALL ELECTRIC PARKING BRAKE ECU


    1. A01GIYU

      Install the ECU with the 2 nuts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    2. Connect the 2 connectors.

  2. INSTALL SEAT BELT CONTROL ECU

    Click here

  3. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH

    Click here

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  5. INSTALL COWL TOP VENTILATOR LOUVER


    1. A01GM4S

      for LHD:

      Install the 6 clips and cowl top ventilator louver RH.

      Note

      If the cowl top ventilator louver RH is not properly installed, water may leak into the engine room and cause malfunctions. Therefore, make sure the cowl top ventilator louver RH is installed properly.

    2. A01GI9P

      for RHD:

      Install the 6 clips and cowl top ventilator louver LH.

      Note

      If the cowl top ventilator louver LH is not properly installed, water may leak into the engine room and cause malfunctions. Therefore, make sure the cowl top ventilator louver LH is installed properly.

  6. PERFORM INITIALIZATION

    Click here

    Note

    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

  7. PERFORM CALIBRATION

    Click here