POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM PROBLEM SYMPTOMS TABLE
Tech Tips
-
Use the table below to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
-
The power tilt and power telescopic steering column system uses the CAN communication system, so check its diagnostic system before proceeding to troubleshooting.
-
If the instruction "PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE" is given in the flowchart of a symptom, proceed to the next suspected area in the table below to continue the check.
-
If the problem still occurs when there is no abnormality in the related circuits, check the multiplex tilt and telescopic ECU and replace it if necessary.
-
Problem symptoms may occur if the electric power control system's functions malfunction. Follow the HOW TO PROCEED WITH TROUBLESHOOTING procedures.
| Symptom | Suspected Area | See page |
|---|---|---|
| Only manual switch does not operate | Tilt and telescopic manual switch circuit | |
| Headlight dimmer switch assembly (Tilt and Telescopic manual switch) | ||
| Multiplex tilt and telescopic ECU | ||
| Only auto away/return function does not operate | Check customization status of auto away function using intelligent tester | |
| IG power source circuit | ||
| Multiplex tilt and telescopic ECU | ||
| Only auto away function does not operate | Entry and start system function | |
| Multiplex tilt and telescopic ECU | ||
| Only auto return function does not operate | Entry and start system function | |
| Multiplex tilt and telescopic ECU | ||
| Only memory function does not operate | Driving position memory switch | |
| Multiplex tilt and telescopic ECU |