ELECTRIC PARKING BRAKE SYSTEM, Diagnostic DTC:C1245/62

DTC Code DTC Name
C1245/62 Deceleration Sensor

DESCRIPTION

The electric parking brake ECU receives vehicle tilt information from the yaw rate and acceleration sensor via CAN communication.

DTC Code Detection Condition Trouble Area
C1245/62

Both of following conditions are met:


  1. Engine switch is on (IG)

  2. Inconsistency of G sensor 1 and 2 output values occurs for 60 sec. when G sensor outputs malfunction signal or G sensor is stuck*

 Yaw rate and acceleration sensor

Tech Tips

*: The G sensor is judged to be stuck when the G sensor is stuck and the vehicle is driven and stopped 16 times.

INSPECTION PROCEDURE

Note

If the electric parking brake ECU or parking brake with bracket actuator assembly is replaced, perform the "Reset Memory" and "ACQUIRE TENSION SENSOR ZERO POINT" procedures Click here.

PROCEDURE


  1. CHECK DTC (ELECTRONICALLY CONTROLLED BRAKE SYSTEM)


    1. Check for DTC Click here.

      Result
      Result Proceed to
      DTC is not output A
      DTC C1243, C1244, C1245, C1381, C1336 or U0124 is output B

    B

    GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM Click here

    A

  2. CHECK DTC


    1. Check for DTC Click here.

      Result
      Result Proceed to
      DTC is output A
      DTC is not output B

    B

    USE SIMULATION METHOD TO CHECK Click here

    A

    GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM Click here