TIRE PRESSURE WARNING RESET SWITCH INSTALLATION

Tech Tips


  • Use the same procedure for the RHD and LHD models.

  • The procedure listed below is for the LHD model.


  1. INSTALL TIRE PRESSURE WARNING RESET SWITCH


    1. Attach the 2 claws to install the tire pressure warning reset switch to the No. 1 instrument panel under cover sub-assembly.

    2. Connect the connector.

  2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    A01GKF1

    1. Connect each connector and each wire harness clamp.

    2. Attach the 2 claws to connect the DLC3.

    3. Attach the 2 claws to install the No. 1 instrument panel under cover sub-assembly.

    4. Install the 2 screws.

  3. INSPECT TIRE PRESSURE WARNING SYSTEM

    Click here