TIRE PRESSURE WARNING ANTENNA (for Front Side) INSTALLATION


  1. INSTALL TIRE PRESSURE WARNING ANTENNA


    1. Install the tire pressure warning antenna with the nut.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

    2. Connect the connector.

  2. INSTALL FRONT FENDER LINER LH


    1. Install the front fender liner LH with the 15 screws and 6 clips.

  3. INSTALL FRONT FENDER WHEEL OPENING MOULDING LH


    1. Attach the clip to install the moulding.

    2. Install the 5 screws.

  4. INSTALL FRONT FENDER MAIN SEAL LH


    1. A01GNTSE01

      Push in the clip labeled A in the illustration in the upward direction of the vehicle and install the front fender main seal LH with the 3 clips.

  5. INSPECT TIRE PRESSURE WARNING SYSTEM

    Click here