TIRE PRESSURE WARNING ANTENNA (for Front Side) REMOVAL


  1. REMOVE FRONT FENDER MAIN SEAL LH


    1. A01GNTSE01

      Loosen the clip labeled A in the illustration, and then remove the 3 clips and front fender main seal LH.

      Tech Tips

      Clip A cannot be removed.

  2. REMOVE FRONT FENDER WHEEL OPENING MOULDING LH

    A01GJAY

    1. Remove the 5 screws.

    2. Detach the clip and remove the moulding.

  3. REMOVE FRONT FENDER LINER LH


    1. A01GIO7

      Remove the 15 screws, 6 clips and front fender liner LH.

  4. REMOVE TIRE PRESSURE WARNING ANTENNA


    1. A01GLNM

      Disconnect the connector.

    2. Remove the nut and tire pressure warning antenna.