INSPECT TIRE
Check the tires for wear and proper inflation pressure.
| Specified Pressure (When Tire is Cool) | |||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| for Europe | |||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
| Specified Pressure (When Tire is Cool) | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| for Australia | ||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||
| Specified Pressure (When Tire is Cool) | ||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| for Middle East and General Export | ||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||
| Specified Pressure (When Tire is Cool) | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| for China | ||||||||||||||||||
|
||||||||||||||||||
Using a dial indicator, check the runout of the tires.
| Tire runout |
|---|
| 1.0 mm (0.0394 in.) or less |
Tech Tips
Remove the wheel assembly from the vehicle, and measure the wheel assembly alone.
ROTATE TIRE
| *A | w/ Spare Tire |
| *B | w/o Spare Tire |
| *a | Front of the Vehicle |
Rotate the tires as shown in the illustration.
Tech Tips
When a tire rotation is performed on a vehicle that has different specified tire pressures for the front and rear of the vehicle, it is necessary to perform initialization for the tire pressure warning system Click here.
INSPECT WHEEL BALANCE
Check and adjust the off-the-car balance.
| Maximum imbalance after adjustment |
|---|
| 8.0 g (0.0176 lb.) |
Note
Use a cleaning detergent to remove dirt, oil and water from the surface where the balance weight is to be adhered.
Do not touch the sticking surface of the tape.
Adhere a sticking type balance weight to the flat surface (A) shown in the illustration.
| Width (A) |
|---|
| 25 mm (0.984 in.) |
Push the balance weight firmly to adhere it to the position.
Do not reuse the balance weight.
Please use the LEXUS genuine sticking type balance weight.
Tech Tips
If the tires vibrate even after off-the-car balance adjustment, adjust the wheel balance with on-the-car balancing as necessary.
INSPECT FRONT AXLE HUB BEARING LOOSENESS
for 2WD: Click here
for AWD: Click here
INSPECT FRONT AXLE HUB RUNOUT
for 2WD: Click here
for AWD: Click here
INSPECT REAR AXLE HUB BEARING LOOSENESS
INSPECT REAR AXLE HUB RUNOUT