FRONT STABILIZER BAR (for 2WD) REMOVAL


  1. REMOVE FRONT WHEEL

  2. REMOVE NO. 2 ENGINE UNDER COVER


    1. A01GNYR

      Remove the 8 bolts and No. 2 engine under cover.

  3. REMOVE FRONT STABILIZER LINK ASSEMBLY LH


    1. A01GJW2

      Remove the 2 nuts and front stabilizer link.

      Tech Tips

      If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud.

  4. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Remove the RH side following the same procedures as the LH side.

  5. REMOVE ENGINE UNDER COVER SUB-ASSEMBLY LH


    1. A01GHJU

      Remove the 2 screws and engine under cover sub-assembly LH from the front suspension member reinforcement LH.

  6. REMOVE ENGINE UNDER COVER SUB-ASSEMBLY RH

    Tech Tips

    Remove the RH side following the same procedures as the LH side.

  7. REMOVE ENGINE UNDER COVER REAR LH


    1. A01GIJV

      Remove the 2 screws and engine under cover rear LH.

  8. REMOVE ENGINE UNDER COVER REAR RH

    Tech Tips

    Remove the RH side following the same procedures as the LH side.

  9. REMOVE FRONT NO. 1 STABILIZER BRACKET LH


    1. A01GLBT

      Remove the 2 bolts and front No. 1 stabilizer bracket LH from the front suspension crossmember.

  10. REMOVE FRONT NO. 1 STABILIZER BRACKET RH

    Tech Tips

    Remove the RH side following the same procedures as the LH side.

  11. REMOVE FRONT STABILIZER BAR


    1. Remove the front stabilizer bar from the vehicle.

  12. REMOVE FRONT NO. 1 STABILIZER BAR BUSH


    1. Remove the 2 front No. 1 stabilizer bar bushes from the front stabilizer bar.

  13. REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT LH


    1. A01GKBX

      Remove the 4 bolts and front suspension member reinforcement LH from the vehicle.

  14. REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT RH

    Tech Tips

    Remove the RH side following the same procedures as the LH side.