FRONT LOWER SUSPENSION ARM (for 2WD) INSPECTION


  1. INSPECT FRONT NO. 1 SUSPENSION LOWER ARM ASSEMBLY LH


    1. A01GICV

      Temporarily install the nut, and flip the ball joint stud back and forth 5 times as shown in the illustration.

    2. Use a torque wrench to turn the nut continuously at a rate of 3 to 5 seconds per turn. Take the torque reading on the fifth turn.

      Standard turning torque
      3.0 N*m (31 kgf*cm, 27 in.*lbf)