FRONT STABILIZER BAR (for AWD) REMOVAL


  1. REMOVE FRONT CENTER FLOOR COVER


    1. A01GLG7

      Remove the 3 screws, 2 bolts, clip and front center floor cover.

  2. REMOVE NO. 2 ENGINE UNDER COVER


    1. A01GKN2

      Remove the 4 screws, 2 clips and No. 2 engine under cover.

  3. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH


    1. for 2WD:

      Remove the 2 screws and front wheel opening extension pad LH.

    2. for AWD:

      Remove the 5 screws and front wheel opening extension pad LH.

      A01GJSHE01
      Text in Illustration
      *A for 2WD *B for AWD

  4. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

    Tech Tips

    Use the same procedure described for the LH side.

  5. REMOVE NO. 1 ENGINE UNDER COVER


    1. A01GHO1E01
      Text in Illustration
      *A for 2WD
      *B for AWD

      Remove the 13 screws, 7 clips and No. 1 engine under cover.

  6. REMOVE FRONT LOWER SUSPENSION MEMBER PROTECTOR


    1. A01GI4D

      Remove the 9 bolts and front suspension member protector lower.

  7. REMOVE FRONT STABILIZER LINK ASSEMBLY LH


    1. A01GHJW

      Remove the 2 nuts and front stabilizer link.

      Tech Tips

      If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud bolt.

  8. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Remove the RH side following the same procedures as the LH side.

  9. REMOVE FRONT NO. 1 STABILIZER BRACKET LH


    1. Remove the bolt and wire harness bracket.

    2. A01GMW6

      Remove the 2 bolts and front No. 1 stabilizer bracket LH from the front frame assembly.

  10. REMOVE FRONT NO. 1 STABILIZER BRACKET RH


    1. A01GNIE

      Remove the 2 bolts and the front No. 1 stabilizer bracket RH from the front frame assembly.

  11. REMOVE FRONT STABILIZER BAR


    1. Remove the front stabilizer bar from the vehicle.

  12. REMOVE FRONT NO. 1 STABILIZER BAR BUSH


    1. Remove the 2 front No. 1 stabilizer bar bushes from the front stabilizer bar.