SUSPENSION CONTROL ECU (for LHD) REMOVAL


  1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  2. DISCONNECT CONNECTORS (w/ Clearance Warning ECU)

  3. DISCONNECT CONNECTORS (w/ Parking Assist ECU)

  4. REMOVE NETWORK GATEWAY ECU (w/ Network Gateway ECU)


    1. A01GNFN

      Disconnect each connector.

    2. A01GICL

      Remove the bolt, nut and No. 1 ECU integration bracket.

    3. A01GIBH

      Remove the 2 nuts and network gateway ECU.

  5. REMOVE SUSPENSION CONTROL ECU WITH BRACKET (w/o Network Gateway ECU)


    1. A01GMY8

      Disconnect the suspension control ECU connectors.

      Tech Tips

      Do not apply excessive force to the wire harnesses.

    2. A01GJD6

      Remove the bolt, nut and bracket.

  6. REMOVE SUSPENSION CONTROL ECU


    1. A01GNOM

      Remove the 2 nuts and suspension control ECU from the bracket.

      Note


      • Avoid any impact to the suspension control ECU.

      • Do not drop the ECU. If it is dropped, replace it with a new one.