HEIGHT CONTROL SENSOR (for Front LH) REMOVAL

CAUTION:

Be sure to read the "PRECAUTION" thoroughly before servicing Click here

Tech Tips


  • Use the same procedures for the RH side and LH side.

  • The procedures listed below are for the LH side.


  1. REMOVE FRONT WHEEL LH

  2. REMOVE FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH (for 2WD)


    1. A01GNPF

      Disconnect the connector.

    2. A01GKMA

      Remove the bolt and disconnect the height control sensor link from the lower arm.

    3. A01GL15

      Remove the 2 bolts and detach the 2 clips.

    4. Remove the height control sensor.

      Note

      Do not drop the height control sensor. If it is dropped, replace it with a new one.

  3. REMOVE FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH (for AWD)


    1. A01GIR7

      Disconnect the connector.

    2. A01GN5M

      Remove the bolt and disconnect the height control sensor link from the lower arm.

    3. A01GLX7

      Remove the 2 bolts and detach the 2 clips.

    4. Remove the front height control sensor sub-assembly LH.

      Note

      Do not drop the front height control sensor sub-assembly LH. If it is dropped, replace it with a new one.