HEIGHT CONTROL COMPRESSOR INSTALLATION


  1. INSTALL HEIGHT CONTROL COMPRESSOR


    1. A01GI9S

      Install the 3 bushings and bracket to the height control compressor with the 3 bolts.

      Torque:
      5.9 N*m  { 60 kgf*cm, 52 in.*lbf }

    2. Push the connector into the housing until a clicking sound is heard.

    3. Attach the 3 clamps.

    4. A01GJC1

      Install the height control sensor with the bolt and 2 nuts.

      Torque:
      19.1 N*m  { 195 kgf*cm, 14 ft.*lbf }

    5. Connect the height control tube Click here.

    6. Connect the height control filter to the bumper reinforcement.

    7. A01GLFF

      Connect the 2 connectors and attach the 2 clamps.

  2. INSPECT FOR AIR LEAK

    Click here

  3. INSTALL FRONT FENDER LINER RH


    1. Install the 2 bolts.

  4. INSTALL FRONT BUMPER COVER

    Click here

  5. INSTALL FRONT WHEEL RH

    Torque:
    140 N*m  { 1428 kgf*cm, 103 ft.*lbf }