DIFFERENTIAL OIL (for 2WD) ON-VEHICLE INSPECTION


  1. CHECK DIFFERENTIAL OIL


    1. A01GMAV

      Stop the vehicle on a level place.

    2. Using a 10 mm hexagon wrench, remove the differential filler plug and gasket.

    3. A01GJC7E27

      Check that the oil surface is within 5 mm (0.20 in.) of the lowest position of the inner surface of the differential filler plug opening.

      Note


      • Excessively large or small amounts of oil may cause trouble.

      • After replacing oil, drive the vehicle and check the oil level.

      Tech Tips

      If necessary, fill the rear differential carrier with Toyota Genuine Differential gear oil LT 75W-85 GL-5, Toyota Genuine Differential gear oil LX 75W-85 GL-5 or their equivalent.

    4. Check for oil leakage when the oil level is low.

    5. Using a 10 mm hexagon wrench, install the differential filler plug and a new gasket.

      Torque:
      49 N*m  { 500 kgf*cm, 36 ft.*lbf }

  2. ADD DIFFERENTIAL OIL


    1. A01GL7L

      Using a 10 mm hexagon wrench, remove the differential filler plug and gasket.

    2. Add oil.

      Standard capacity
      1.30 to 1.40 liters (1.38 to 1.48 US qts, 1.15 to 1.23 Imp. qts)
      Oil grade
      Toyota Genuine Differential gear oil LT 75W-85 GL-5, Toyota Genuine Differential gear oil LX 75W-85 GL-5 or equivalent

    3. Check the oil level.

    4. Using a 10 mm hexagon wrench, install the differential filler plug and a new gasket.

      Torque:
      49 N*m  { 500 kgf*cm, 36 ft.*lbf }

      Note

      After replacing the oil, recheck the oil level after driving.