FRONT DIFFERENTIAL CARRIER ASSEMBLY (for AWD) INSTALLATION


  1. INSTALL FRONT DIFFERENTIAL CARRIER ASSEMBLY


    1. A01GKZE

      Support the front differential carrier assembly with a jack and temporarily install it to the oil pan with the 4 bolts.

      CAUTION:

      As the front differential carrier assembly is very heavy, securely support it with the jack.

    2. A01GIA4E02
      Text in Illustration
      *1 Front Differential Carrier Retainer Sub-assembly
      *2 Oil Pan Sub-assembly

      Align the front differential carrier retainer sub-assembly and oil pan so that their ends are aligned and tighten the 4 bolts to install the front differential carrier assembly.

      Torque:
      81 N*m  { 826 kgf*cm, 60 ft.*lbf }

  2. INSTALL ENGINE ASSEMBLY TO VEHICLE


    1. Remove the engine from the engine stand and then install it to the vehicle Click here.

  3. ADD DIFFERENTIAL OIL


    1. for Front Differential:


      1. A01GLEEE01

        Add differential oil so that the oil level is between 0 to 5 mm (0 to 0.197 in.) from the bottom lip of the differential filler plug hole.

        Note


        • Too much or too little oil will lead to differential problems.

        • After changing the oil, drive the vehicle and then check the oil level again.

        Oil type
        Toyota Genuine Differential Gear Oil LT 75W-85 GL-5 or equivalent.
        Capacity
        0.7 to 0.8 liters (0.74 to 0.84 US qts., 0.62 to 0.70 Imp. qts.)
      2. A01GIVG

        Using a 10 mm hexagon wrench, install a new gasket and the filler plug.

        Torque:
        39 N*m  { 398 kgf*cm, 29 ft.*lbf }

    2. for Rear Differential:


      1. A01GIYCE01

        Add differential oil so that the oil level is between 0 to 5 mm (0 to 0.197 in.) from the bottom lip of the differential filler plug hole.

        Note


        • Too much or too little oil will lead to differential problems.

        • After changing the oil, drive the vehicle and then check the oil level again.

        Oil type
        Toyota Genuine Differential Gear Oil LX 75W-85 GL-5 or equivalent
        Capacity
        1.3 to 1.4 liters (1.38 to 1.47 US qts., 1.15 to 1.23 Imp. qts.)
      2. A01GNBL

        Using a 10 mm hexagon wrench, install a new gasket and the filler plug.

        Torque:
        49 N*m  { 500 kgf*cm, 36 ft.*lbf }