PARK / NEUTRAL POSITION SWITCH INSPECTION


  1. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY

    A01GI3JE06

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      6 (PL) - 2 (RB) Shift lever in P Below 1 Ω
      6 (PL) - 2 (RB) Shift lever not in P 10 kΩ or higher
      1 (RL) - 2 (RB) Shift lever in R Below 1 Ω
      1 (RL) - 2 (RB) Shift lever not in R 10 kΩ or higher
      9 (NL) - 2 (RB) Shift lever in N Below 1 Ω
      9 (NL) - 2 (RB) Shift lever not in N 10 kΩ or higher
      7 (DL) - 2 (RB) Shift lever in D Below 1 Ω
      7 (DL) - 2 (RB) Shift lever not in D 10 kΩ or higher

      If the result is not as specified, replace the switch assembly.