PARK / NEUTRAL POSITION SWITCH REMOVAL


  1. DISCONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY

    A01GKJV

    1. Remove the nut and disconnect the floor shift gear shifting rod.

  2. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY

    A01GJDM

    1. Disconnect the switch connector.

    2. Remove the nut, spring washer and transmission control shaft lever.

    3. A01GNQM

      Using a screwdriver, pry off the lock washer.

    4. A01GLZR

      Remove the lock nut and lock washer.

    5. A01GI3X

      Remove the bolt and park/neutral position switch.

      Tech Tips

      Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch as the detent spring may become detached from the manual valve lever shaft.