ENTRY AND START SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE ENTRY AND START SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current setting before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with intelligent tester


      1. Connect the intelligent tester to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the intelligent tester on.

      4. Enter the following menus: Customize Setting.

      5. Select the setting by referring to the table below.

        Entry&Start
        Display (Item) Default Content Setting Relevant ECU
        Ignition Available Area All Function to permit opening luggage compartment door Front or All Certification ECU

    2. Customizing with the Multi-display


      1. Turn the engine switch on (IG).

      2. Enter the following menus: SET UP / Vehicle / Vehicle Customization / Door Lock Settings.

      3. Select the setting by referring to the table below.

        Door Lock Settings
        Display Default Content Setting Relevant ECU
        Entry and start system On Function that enables or disables the entry and start system. On or Off Certification ECU