COOLING FAN RELAY ON-VEHICLE INSPECTION


  1. CHECK COOLING FAN RELAY (FAN NO. 1)

    A01GJMPE37

    1. Remove the relay from the engine room No. 1 relay block.

    2. Measure the resistance of the relay.

      Standard resistance
      Tester Connection Specified Condition
      3 - 5 10 MΩ or higher
      3 - 5

      Below 1 Ω

      (when battery voltage is applied to terminals 1 and 2)

      If the result is not as specified, replace the relay.

    3. Install the relay to the engine room No. 1 relay block.