COOLING FAN MOTOR (for AWD) INSTALLATION


  1. INSTALL NO. 2 COOLING FAN MOTOR


    1. Install the No. 2 cooling fan motor with the 3 screws.

      Torque:
      3.9 N*m  { 40 kgf*cm, 35 in.*lbf }

    2. Connect the connector.

  2. INSTALL COOLING FAN MOTOR


    1. Install the cooling fan motor with the 3 screws.

      Torque:
      3.9 N*m  { 40 kgf*cm, 35 in.*lbf }

    2. Connect the connector.

  3. INSTALL NO. 2 FAN


    1. Install the No. 2 fan with the nut.

      Torque:
      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }

  4. INSTALL FAN


    1. Install the fan with the nut.

      Torque:
      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }

  5. CHECK COOLING FAN MOTOR OPERATION


    1. Check the cooling fan motor operation.


      1. Check that the fan rotates smoothly by hand.

      2. A01GI27E02
        Text in Illustration
        *a

        Component without harness connected

        (Cooling Fan Motor)
        *b

        Component without harness connected

        (No. 2 Cooling Fan Motor)

        Connect the battery to the fan motor connector.

      3. A01GLAN

        Check that the fan rotates smoothly, and check the motor rotation direction.

        Note

        Make sure there are no malfunction noises or vibrations while the motor is rotating.

        Tech Tips

        Be careful if the positive (+) and negative (-) terminals of the battery are mistakenly connected to the connector in reverse, as the motor will operate in the opposite direction.

  6. INSTALL FAN SHROUD WITH FAN AND MOTOR


    1. A01GJ1C

      Set the fan shroud with fan and motor to the radiator, and attach the claw.

    2. Install the fan shroud with fan and motor with the 2 bolts.

      Torque:
      7.1 N*m  { 72 kgf*cm, 63 in.*lbf }

  7. INSTALL RADIATOR ASSEMBLY

    Click here