COOLING FAN MOTOR (for AWD) ON-VEHICLE INSPECTION


  1. CHECK COOLING FAN MOTOR


    1. Disconnect the cooling fan motor connector.

    2. Check that the fan rotates smoothly by hand.

    3. A01GJLCE01
      Text in Illustration
      *a

      Component without harness connected

      (Cooling Fan Motor)

      Check that the motor turns smoothly when the battery is connected to the fan motor connector.

    4. Measure the current according to the value(s) in the table below.

      Standard Current
      Tester Connection Condition Specified Condition
      2 (+) 20°C (68°F) 14.0 to 18.0 A

      If the result is not as specified, replace the cooling fan motor.

    5. Connect the cooling fan motor connector.

  2. CHECK NO. 2 COOLING FAN MOTOR


    1. Disconnect the cooling fan motor connector.

    2. Check that the fan rotates smoothly by hand.

    3. A01GNN9E01
      Text in Illustration
      *a

      Component without harness connected

      (No. 2 Cooling Fan Motor)

      Check that the motor turns smoothly when the battery is connected to the fan motor connector.

    4. Measure the current according to the value(s) in the table below.

      Standard Current
      Tester Connection Condition Specified Condition
      2 (+) 20°C (68°F) 14.0 to 18.0 A

      If the result is not as specified, replace the No. 2 cooling fan motor.

    5. Connect the No. 2 cooling fan motor connector.