OIL PRESSURE SWITCH REMOVAL


  1. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH (for AWD)


    1. for 2WD:

      Remove the 2 screws and front wheel opening extension pad LH.

    2. for AWD:

      Remove the 5 screws and front wheel opening extension pad LH.

      A01GJSHE01
      Text in Illustration
      *A for 2WD *B for AWD

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH (for AWD)

    Tech Tips

    Use the same procedure described for the LH side.

  3. REMOVE NO. 1 ENGINE UNDER COVER


    1. A01GHO1E01
      Text in Illustration
      *A for 2WD
      *B for AWD

      Remove the 13 screws, 7 clips and No. 1 engine under cover.

  4. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY


    1. Disconnect the switch connector.

    2. A01GHPWE01
      Text in Illustration
      *A for 2WD
      *B for AWD

      Using a 24 mm deep socket wrench, remove the switch.