INTAKE AIR CONTROL VALVE ACTUATOR REMOVAL


  1. REMOVE V-BANK COVER SUB-ASSEMBLY


    1. A01GMKRE01

      Using both hands, lift the rear side of the cover upwards to detach the 4 clips labeled B. Then slide the cover toward the front of the vehicle to detach the 2 clips labeled A and remove the V-bank cover sub-assembly.

      Note


      • The V-bank cover sub-assembly may be damaged if its front and rear are lifted at the same time.

      • When detaching the clips labeled A, be sure to slide the cover toward the front of the vehicle.

  2. REMOVE INTAKE AIR CONTROL VALVE ACTUATOR

    A01GMOA

    1. Disconnect the intake air control valve connector.

    2. Remove the nut and disconnect the actuator rod.

      Tech Tips

      When loosening the nut, hold the actuator rod in place so that it does not move.

    3. Remove the 2 bolts. Then remove the intake air control valve actuator from the intake manifold.