INTAKE AIR CONTROL VALVE ACTUATOR REMOVAL


  1. REMOVE V-BANK COVER SUB-ASSEMBLY

    A01GLQ5E01

    1. While using both hands, lift the rear side of the cover upwards to detach the 4 clips B. Slide the cover towards the front of the vehicle to detach the 2 clips labeled A, and remove the V-bank cover sub-assembly.

      Note

      The V-bank cover sub-assembly may be damaged if its front and rear are lifted at the same time.

  2. REMOVE INTAKE AIR CONTROL VALVE ACTUATOR

    A01GJOE

    1. Disconnect the intake air control valve connector.

    2. Remove the nut, and disconnect the actuator rod.

      Tech Tips

      When loosening the nut, hold the actuator rod in place so that it does not move.

    3. Remove the 2 bolts. Then remove the intake air control valve actuator from the intake manifold.