INTAKE SYSTEM ON-VEHICLE INSPECTION


  1. CHECK INTAKE AIR CONTROL FUNCTION


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Push the intelligent tester main switch ON.

    4. Enter the following menus: Powertrain / Engine / Active test / Activate the VSV for Intake Control.

    5. A01GNYM

      When power is supplied, check that the actuator rod operates.

  2. INSPECT AIR CLEANER FILTER ELEMENT


    1. Check that the air cleaners are not excessively dirty.

      If the air cleaners are excessively dirty, replace both of them at the same time.

    2. A01GNSI

      If cleaning the air cleaner filter element, blow compressed air as shown in the illustration to clean it.

      Clean both air cleaner filters at the same time.