FUEL PUMP REASSEMBLY


  1. INSTALL FUEL PUMP ASSEMBLY


    1. A01GITIE01

      Apply gasoline to a new O-ring. Then install the O-ring and spacer to the fuel pump.

    2. A01GLAAE02

      Apply a light coat of gasoline to 2 new O-rings, and install them onto the fuel main valve.

    3. A01GNXB

      Install the fuel main valve to the fuel filter.

    4. A01GME5

      Attach the 5 claws on the fuel filter and install the fuel pump.

      Note


      • Make sure the O-rings are not cut or pinched during the installation.

      • Attach the claws securely.

    5. A01GL2Q

      Connect the fuel pump connector to the fuel pump.

  2. INSTALL JET PUMP


    1. A01GL7SE01

      Apply gasoline to a new O-ring and install it to the jet pump.

    2. A01GNLQ

      Install the jet pump to the sub-tank as shown in the illustration.

  3. INSTALL FUEL FILTER


    1. A01GJ67

      Install the fuel filter to the sub-tank and attach the 2 claws.

  4. INSTALL FUEL SUCTION PLATE SUB-ASSEMBLY


    1. Install the spring to the fuel suction plate shaft.

    2. Install the fuel suction plate to the sub-tank.

    3. A01GIFGE01

      Install a new E-ring.

    4. A01GM9T

      Connect the fuel pump connector to the fuel suction plate.

  5. INSTALL FUEL SENDER GAUGE ASSEMBLY


    1. A01GJ6P

      Set the fuel sender gauge to the fuel sub-tank. Then slide the sender gauge downward to install it.

    2. Connect the fuel sender gauge connector to the fuel suction plate.

      Note

      Do not touch the resistance plate or contacts of the fuel sender gauge assembly.