FUEL PRESSURE SENSOR INSPECTION


  1. INSPECT FUEL PRESSURE SENSOR

    A01GI4RE02

    1. Check the fuel pressure sensor output voltage.


      1. Measure the voltage according to the value(s) in the table below.

        Standard voltage
        Tester Connection Condition Specified Condition
        2 (PR) - 3 (E2) Apply 5 V between terminals 1 (VC) and 3 (E2) Approximately 0.5 V

        If the result is not as specified, replace the fuel pressure sensor.

        Tech Tips

        The above voltage is output when pressure is not applied (0 kPa (0 kgf/cm2, 0 psi)) to the sensor.