ENGINE (for 2WD) INSPECTION


  1. INSPECT EXHAUST MANIFOLD SUB-ASSEMBLY (for Bank 1)


    1. A01GIB3

      Using a precision straightedge and feeler gauge, measure the warpage of the contact surface of the cylinder head.

      Maximum warpage
      0.7 mm (0.028 in.)

      If the warpage is greater than the maximum, replace the exhaust manifold.

  2. INSPECT EXHAUST MANIFOLD SUB-ASSEMBLY (for Bank 2)


    1. A01GKDC

      Using a precision straightedge and feeler gauge, measure the warpage of the contact surface of the cylinder head.

      Maximum warpage
      0.7 mm (0.028 in.)

      If the warpage is greater than the maximum, replace the exhaust manifold.