ENGINE (for AWD) INSPECTION


  1. INSPECT EXHAUST MANIFOLD SUB-ASSEMBLY LH


    1. A01GNZX

      Using a precision straightedge and feeler gauge, measure the warpage of the contact surface of the cylinder head.

      Maximum warpage
      0.7 mm (0.0276 in.)

      If the warpage is more than the maximum, replace the exhaust manifold sub-assembly LH.

  2. INSPECT EXHAUST MANIFOLD SUB-ASSEMBLY RH


    1. A01GKEG

      Using a precision straightedge and feeler gauge, measure the warpage of the contact surface of the cylinder head.

      Maximum warpage
      0.7 mm (0.0276 in.)

      If the warpage is more than the maximum, replace the exhaust manifold sub-assembly RH.