ENGINE OIL TEMPERATURE SENSOR (for AWD) REMOVAL


  1. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH


    1. for 2WD:

      Remove the 2 screws and front wheel opening extension pad LH.

    2. for AWD:

      Remove the 5 screws and front wheel opening extension pad LH.

      A01GJSHE01
      Text in Illustration
      *A for 2WD *B for AWD

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

    Tech Tips

    Use the same procedure described for the LH side.

  3. REMOVE NO. 1 ENGINE UNDER COVER


    1. A01GHO1E01
      Text in Illustration
      *A for 2WD
      *B for AWD

      Remove the 13 screws, 7 clips and No. 1 engine under cover.

  4. REMOVE OIL TEMPERATURE SENSOR


    1. Disconnect the oil temperature sensor connector.

    2. A01GJ1K

      Remove the oil temperature sensor and gasket.

      Note

      Do not subject the oil temperature sensor to any impacts.

      If the oil temperature sensor is subjected to an impact, replace the oil temperature sensor with a new one.