HEATED OXYGEN SENSOR (for AWD) REMOVAL


  1. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)


    1. A01GIJJE01

      Disconnect the heated oxygen sensor connector.

    2. Using SST, remove the heated oxygen sensor from the front exhaust pipe.

      SST
      09224-00010

  2. REMOVE FRONT DOOR SCUFF PLATE RH

    Click here

  3. REMOVE COWL SIDE TRIM BOARD RH

    Click here

  4. REMOVE FRONT FLOOR SILENCER PAD RH

  5. REMOVE REAR NO. 2 AIR DUCT

  6. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)


    1. A01GLJ5

      Interior Side:

      Disconnect the heated oxygen sensor connector.

    2. Exterior Side:


      1. A01GN3VE01

        Remove the grommet.

      2. Using SST, remove the heated oxygen sensor from the front exhaust pipe.

        SST
        09224-00010